High-performance Nylon stock sheet engineered for critical hydraulic system components. Its robust material properties ensure longevity and reliable operation under extreme conditions.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.203" |
| Length | 44" |
| Width | 17" |
Designed for demanding industrial environments, this Nylon stock sheet offers exceptional tensile strength, high abrasion resistance, and a low coefficient of friction, crucial for hydraulic applications. Measuring 0.203 inches thick, 44 inches in length, and 17 inches in width, it is precisely manufactured from premium-grade Nylon 6/6 (PA66). This material exhibits excellent chemical resistance to many oils, greases, and solvents commonly found in hydraulic systems, preventing premature degradation. Its inherent lubricity minimizes wear on mating surfaces, making it ideal for fabricating custom seals, wear pads, bushings, and guide elements. The material's ability to absorb moisture is minimal, ensuring dimensional stability in varied operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut sheet to required dimensions using appropriate tooling (e.g., industrial saw with fine-tooth blade). 2. Deburr all edges to prevent stress concentration and potential cracking. 3. Install fabricated components according to specific hydraulic system design and manufacturer guidelines, ensuring proper clearances and seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize sharp, high-speed steel or carbide-tipped saw blades specifically designed for cutting Nylon. Maintain appropriate feed rates and cooling if necessary. |
| Over-tightening fasteners during assembly, causing excessive stress and potential failure. | Apply manufacturer-recommended torque specifications for fasteners. Consider using washers to distribute load and prevent localized pressure points. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seals and Gaskets, Wear Strips and Guides, Bushings and Bearings, Custom Hydraulic Component Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||