This high-performance Nylon stock sheet is engineered for critical hydraulic systems. Its robust material composition and precise dimensions ensure reliable performance and extended service life in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.192" |
| Length | 21" |
| Width | 31" |
Manufactured under strict quality controls, this 0.192-inch thick Nylon stock sheet measures 21 inches by 31 inches. Its excellent mechanical strength, high abrasion resistance, and good chemical compatibility make it ideal for fabricating hydraulic components such as seals, wear pads, and guide rings. The material's low coefficient of friction minimizes wear and heat generation, ensuring efficient operation of hydraulic machinery under pressure. This sheet is designed for machining into precise parts required for pump and valve construction.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately cut the Nylon stock sheet to the required dimensions using appropriate machining tools. 2. Deburr all edges to prevent stress concentration and potential cracking. 3. Machine the part to final specifications, ensuring tight tolerances for critical interfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard nylon for high-pressure hydraulic systems. | Always specify and use hydraulic-grade nylon for its superior strength and wear resistance under pressure. |
| Insufficiently deburring machined edges. | Thoroughly deburr all edges after cutting and machining to prevent premature failure due to stress risers. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seal Fabrication, Wear Pad Manufacturing, Guide Ring Production.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||