This 0.188" thick Nylon stock sheet offers exceptional durability and wear resistance, making it a superior material for demanding hydraulic system components. Its robust properties ensure longevity and reliable performance in high-pressure environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.188" |
| Length | 24" |
| Width | 17" |
A proven choice for industrial professionals, this 0.188" thick Nylon stock sheet, measuring 24" x 17", provides excellent tensile strength, abrasion resistance, and low coefficient of friction. Its inherent lubricity and resistance to hydraulic fluids make it ideal for manufacturing seals, bearings, bushings, and wear pads in hydraulic machinery. The material's ability to absorb shock and vibration further enhances system efficiency and longevity, offering a cost-effective solution for critical hydraulic components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Prepare mating surfaces for optimal contact and adhesion if required for the application. 3. Install the fabricated Nylon component into the hydraulic system, ensuring proper alignment and fitment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize sharp, specialized cutting tools for plastics, such as a fine-tooth saw blade or a router bit, to ensure clean cuts and prevent material damage. |
| Over-tightening fasteners when securing Nylon components, causing deformation or cracking. | Apply appropriate torque specifications when fastening Nylon parts. Consider using larger washers to distribute load and prevent stress concentration. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Seals, Pump Components, Wear Strips and Bushings, Hydraulic Manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||