This robust Nylon stock sheet offers exceptional strength and wear resistance for a wide range of industrial applications. Its precise dimensions ensure reliable performance in demanding environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.187" |
| Length | 44" |
| Width | 29" |
Built to exacting engineering tolerances, this 0.187" thick Nylon stock sheet measures 44" in length and 29" in width. Composed of high-performance nylon, it exhibits superior tensile strength, excellent abrasion resistance, and low coefficient of friction. These properties make it ideal for fabricating wear pads, bushings, gears, and custom machine components where durability and smooth operation are critical. Its chemical resistance further extends its utility in various industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark cut lines on the nylon sheet according to the required dimensions. 2. Utilize appropriate cutting tools (e.g., band saw, router with a straight bit) to precisely cut the sheet. 3. Smooth any rough edges using a file or sandpaper for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to melting or chipping of the nylon. | Employ sharp blades designed for plastics or high-speed steel tools with adequate cooling to prevent melting and ensure clean cuts. |
| Over-tightening fasteners when mounting, which can stress or crack the nylon. | Use washers to distribute load and avoid excessive torque. Consider slotted holes if expansion or contraction is anticipated. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Custom Bushings and Bearings, Protective Covers and Guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||