This high-performance Nylon stock sheet, precisely manufactured to 0.180" thickness, 20" length, and 15" width, offers exceptional durability and mechanical strength for demanding industrial uses.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.180" |
| Length | 20" |
| Width | 15" |
Specified by design engineers worldwide, this Nylon stock sheet offers a robust solution for a myriad of applications. Its 0.180" thickness, combined with a 20" length and 15" width, provides a substantial material for fabrication. Nylon's inherent properties, including excellent wear resistance, high tensile strength, and good impact resistance, make it ideal for components subjected to friction and stress. This material exhibits low friction coefficients, good chemical resistance, and electrical insulating capabilities, further enhancing its utility in diverse environments. Dimensional stability under varying conditions is a key performance indicator for this product.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired cut dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., band saw, router with a suitable bit) for precise fabrication, ensuring coolant is used if necessary to prevent overheating. 3. Smooth cut edges with a deburring tool or fine-grit sandpaper to achieve a clean finish and remove any sharp points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without considering Nylon's melting point, leading to gummed edges and inaccurate cuts. | Employ sharp, carbide-tipped tooling and maintain appropriate cutting speeds. Consider using a coolant or air blast to dissipate heat during cutting. |
| Over-tightening fasteners during assembly, which can lead to stress concentrations and potential cracking of the Nylon material. | Use torque wrenches to ensure fasteners are tightened to specified values. Consider using washers to distribute load over a larger area. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Gears and sprockets, Bushings and bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||