This premium Nylon stock sheet, measuring 0.165 inches thick by 42 inches wide and 33 inches long, is engineered for demanding heating and cooling applications. Its robust material properties ensure exceptional performance and longevity.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.165" |
| Length | 42" |
| Width | 33" |
Manufactured under strict quality controls, this Nylon stock sheet features a precise 0.165" thickness, 42" length, and 33" width. Composed of high-grade nylon, it exhibits excellent abrasion resistance, low coefficient of friction, and good impact strength, making it ideal for components within HVAC systems. Its thermal insulation properties contribute to efficient heat transfer management and reduced energy loss. The material's inherent chemical resistance also ensures durability in various environmental conditions commonly found in heating and cooling installations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove debris. 2. Accurately measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut sheet to the intended application area using recommended fasteners or adhesives, ensuring a snug fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during cutting, leading to material cracking. | Employ sharp, industrial-grade cutting tools and maintain a consistent, controlled cutting speed. |
| Inadequate surface preparation before installation, resulting in poor adhesion or fit. | Ensure the mounting surface is free from oils, dust, and moisture before proceeding with installation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC duct liners, Sealing strips for air handlers, Bearing surfaces in fan assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||