This robust Nylon stock sheet offers exceptional durability and chemical resistance, making it an ideal material for demanding heating and cooling applications requiring long-term performance and reliability.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.161" |
| Length | 17" |
| Width | 44" |
A proven choice for industrial professionals, this Nylon stock sheet, measuring 0.161 inches in thickness, 17 inches in length, and 44 inches in width, provides superior mechanical strength and abrasion resistance. Its excellent dielectric properties and low coefficient of friction make it suitable for various insulation and wear-resistant components within heating and cooling systems. The material's inherent toughness and resistance to common industrial fluids ensure longevity and consistent performance in challenging environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean, dry, and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Secure the sheet using mechanical fasteners or a suitable industrial adhesive, ensuring a tight and uniform fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for Nylon, leading to chipping or melting. | Utilize sharp, high-speed cutting tools specifically rated for plastics, such as carbide-tipped blades, with adequate lubrication or cooling. |
| Over-tightening fasteners, causing stress concentration and potential cracking. | Apply fasteners with appropriate torque settings, using washers to distribute the load evenly across the Nylon sheet. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Insulating barriers in heat exchangers, Wear strips and guide components in HVAC systems, Duct liners and sealing components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||