Engineered from robust nylon, this stock sheet offers exceptional wear resistance and impact strength, making it a premium choice for demanding hydraulic applications and custom fabrication.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.159" |
| Length | 43" |
| Width | 39" |
Designed for demanding industrial environments, this 0.159" thick Nylon stock sheet provides superior mechanical properties critical for hydraulic systems. Its inherent toughness, excellent abrasion resistance, and good chemical inertness ensure reliable performance under high pressure and continuous operation. The generous dimensions of 43" x 39" allow for efficient cutting and fabrication of custom seals, wear components, bushings, and other critical parts, minimizing waste and maximizing utility in diverse hydraulic machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark desired component dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., bandsaw, laser cutter) to precisely shape the component. 3. Ensure all edges are deburred and surfaces are clean before installation into the hydraulic assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools that generate excessive heat, leading to melting or deformation of the nylon. | Employ sharp, high-speed cutting tools with adequate coolant or lubrication to prevent heat buildup and maintain material integrity. |
| Over-tightening fasteners when securing nylon components, potentially causing stress cracks or deformation. | Apply fasteners with appropriate torque specifications, using washers if necessary to distribute load and avoid localized pressure points. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seals and Gaskets, Wear Pads and Strips, Custom Bushings and Bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||