This high-performance Nylon stock sheet, measuring 0.157" thick, 36" long, and 35" wide, is engineered for demanding pressure and temperature control environments. It provides robust insulation and exceptional durability.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.157" |
| Length | 36" |
| Width | 35" |
Manufactured under strict quality controls, this Nylon stock sheet exhibits a nominal thickness of 0.157 inches, a length of 36 inches, and a width of 35 inches. Nylon's inherent properties, including excellent tensile strength, abrasion resistance, and good thermal insulation, make it suitable for applications requiring mechanical support and environmental separation in moderate pressure and temperature ranges. Its low coefficient of friction also aids in smooth operation of moving parts. Standard industry tolerances apply to all dimensions. This sheet is designed to withstand typical operational stresses found in control systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean, dry, and free from debris. 2. Carefully cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut sheet to the intended application using suitable mechanical fasteners or adhesives, ensuring a tight seal where necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers. | Employ cutting tools with sharp, specialized blades designed for plastics to prevent chipping or melting. |
| Over-tightening fasteners, which can stress the Nylon material. | Use washers and avoid overtightening to prevent cracking or deformation of the Nylon sheet. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Gasketing for moderate pressure seals, Insulating barriers in control enclosures, Wear strips and guides in automated systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||