This robust Nylon stock sheet provides superior performance in demanding hydraulic systems. Its exceptional wear resistance and low coefficient of friction make it ideal for various fluid power components.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.150" |
| Length | 18" |
| Width | 47" |
A high-performance industrial component, this 0.150-inch thick Nylon stock sheet, measuring 18 inches in length and 47 inches in width, is engineered for demanding hydraulic environments. Its inherent properties include excellent abrasion resistance, a low coefficient of friction for reduced wear on mating parts, and good chemical resistance to common hydraulic fluids. These characteristics make it a preferred material for fabricating seals, bearings, wear pads, and custom fittings where reliability and longevity are paramount. The material's ability to absorb shock and vibration further enhances its suitability for critical hydraulic assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Deburr all cut edges to ensure a smooth finish and prevent premature wear. 3. Integrate the fabricated component into the hydraulic assembly according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to poor edge quality and potential material stress. | Employ sharp, high-quality cutting tools specifically designed for plastics to ensure clean, precise cuts and minimize material damage. |
| Failing to deburr edges, creating sharp points that can damage seals or cause rapid wear. | Thoroughly deburr all cut edges with a file or deburring tool to achieve a smooth, rounded finish. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seal Fabrication, Wear Pad Manufacturing, Custom Bearing Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||