This robust Nylon stock sheet provides exceptional durability and wear resistance for critical pressure and temperature control applications. Its engineered properties ensure reliable performance in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.142" |
| Length | 16" |
| Width | 15" |
A high-performance industrial component, this Nylon stock sheet is manufactured to precise dimensions of 0.142 inches thick, 16 inches in length, and 15 inches in width. Its inherent material properties include excellent tensile strength, good impact resistance, and a low coefficient of friction, making it suitable for components subjected to mechanical stress and moderate thermal fluctuations. The material's chemical resistance also contributes to its longevity in various industrial settings, from seals and gaskets to wear pads and structural elements within control systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 3. Securely fasten the cut component using mechanical fasteners or adhesives suitable for Nylon and the operating environment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers, leading to poor edge finish and potential delamination. | Utilize carbide-tipped blades or specialized polymer cutting tools for clean, precise cuts. |
| Over-tightening fasteners, which can cause stress concentration and cracking in the Nylon. | Apply fasteners with controlled torque, using washers to distribute load if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Seals and Gaskets in Pneumatic Systems, Wear Plates and Bushings in Conveyor Systems, Insulating Components in Temperature Control Units.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||