This premium Nylon stock sheet is engineered for superior durability and performance in demanding environments. Its robust material composition and precise dimensions make it an ideal choice for custom fabrication and critical hardware components.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.128" |
| Length | 27" |
| Width | 26" |
Purpose-built for heavy-duty applications, this Nylon stock sheet offers exceptional wear resistance, impact strength, and chemical inertness. Measuring 0.128 inches in thickness, 27 inches in length, and 26 inches in width, it provides a substantial material base for a wide array of engineering projects. The inherent properties of nylon, such as its low coefficient of friction and high tensile strength, make it suitable for components requiring smooth operation and load-bearing capabilities in industrial machinery, protective shielding, and custom tooling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw, laser cutter) for precise shaping. 3. Secure the fabricated nylon component using suitable fasteners and adhesives as per application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to poor edge finish and material stress. | Employ high-speed steel or carbide-tipped blades with appropriate tooth pitch for clean cuts and minimal heat buildup. |
| Over-tightening fasteners, which can cause stress concentration and cracking in the nylon material. | Use washers to distribute load and tighten fasteners to a snug fit, avoiding excessive torque. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Protective Guards and Bumpers, Custom Machined Parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||