This robust Nylon stock sheet, engineered for demanding pressure and temperature control environments, offers exceptional durability and dimensional stability. Its versatile nature makes it ideal for a wide range of industrial applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.123" |
| Length | 48" |
| Width | 17" |
Trusted by engineers across multiple sectors, this Nylon stock sheet (0.123" thickness, 48" length, 17" width) provides excellent mechanical strength, abrasion resistance, and good thermal insulation properties, making it suitable for components in hydraulic systems, pneumatic seals, and thermal barriers. Nylon's inherent chemical resistance further enhances its utility in corrosive environments, ensuring reliable performance under challenging operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean, dry, and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut sheet using mechanical fasteners or approved adhesives, ensuring a tight seal if required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull cutting tool, leading to rough edges and potential material stress. | Employ sharp, high-quality cutting tools designed for plastics to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause stress concentration and cracking in the Nylon. | Use appropriate torque settings for fasteners, or consider using washers to distribute load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic and Pneumatic System Components, Sealing Gaskets and Washers, Thermal and Electrical Insulation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||