This robust 0.122" thick Nylon stock sheet, measuring 36" x 32", offers superior wear resistance and excellent thermal insulation properties, making it a critical component for various heating and cooling systems.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.122" |
| Length | 36" |
| Width | 32" |
Trusted by engineers across multiple sectors, this Nylon stock sheet exhibits a precise thickness of 0.122 inches, a standard length of 36 inches, and a width of 32 inches. Manufactured from high-performance nylon, it offers exceptional tensile strength, low friction coefficient, and good chemical resistance. These properties make it suitable for applications requiring robust mechanical performance under moderate thermal loads, such as insulation barriers, structural components in HVAC units, and wear pads in cooling equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris. 2. Accurately cut the nylon sheet to the required dimensions using appropriate industrial cutting tools. 3. Secure the sheet using industry-standard fasteners or adhesives suitable for nylon and the application environment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Employ specialized cutting tools with sharp, fine-toothed blades designed for plastics to prevent chipping and ensure clean edges. |
| Over-tightening fasteners, leading to stress cracking. | Use washers and avoid overtightening fasteners. If possible, utilize grommets or spacers to distribute stress. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC duct insulation and sealing, Bearing surfaces and wear pads in cooling fans, Thermal barriers in heating equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||