This high-performance Nylon stock sheet offers exceptional strength and durability for demanding pulling and lifting tasks. Its robust construction ensures reliable operation in industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.121" |
| Length | 45" |
| Width | 14" |
Engineered for reliability and performance, this 0.121-inch thick Nylon stock sheet provides a substantial working surface of 45 inches in length and 14 inches in width. Constructed from high-tensile strength Nylon, it exhibits excellent abrasion resistance, low friction, and good impact absorption, making it ideal for various material handling and rigging applications. The material's inherent flexibility allows it to conform to shapes while maintaining structural integrity under load. Verify load capacities with engineering calculations specific to your application.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended mounting surface thoroughly. 2. Position the Nylon stock sheet according to the project requirements. 3. Secure the sheet using appropriate fasteners (e.g., bolts, rivets) ensuring even distribution of clamping force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing stress concentrations. | Use washers and ensure fasteners are snug but not over-tightened, allowing for slight material compression. |
| Using in environments exceeding Nylon's chemical resistance or temperature limits. | Consult material compatibility charts and ensure the operating environment is within specified parameters for Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Industrial rigging and hoists, Material handling equipment components, Protective wear pads for lifting slings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||