This robust Nylon Stock Sheet provides exceptional durability and wear resistance. Engineered for demanding plumbing and janitorial tasks, it offers reliable performance in challenging industrial settings.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.107" |
| Length | 35" |
| Width | 14" |
Built to exacting engineering tolerances, this 0.107-inch thick Nylon Stock Sheet measures 35 inches in length and 14 inches in width. Composed of high-performance nylon, it exhibits superior tensile strength, excellent abrasion resistance, and a low coefficient of friction, making it ideal for fabricating custom components. Its chemical inertness ensures longevity when exposed to common cleaning agents and water. This material is precisely manufactured to meet stringent industry standards for consistent quality and predictable behavior in demanding applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark cut lines on the nylon stock sheet according to desired component dimensions. 2. Utilize appropriate cutting tools (e.g., band saw, router) for precise fabrication. 3. Smooth all cut edges to remove burrs and ensure a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to chipping or melting of the nylon. | Employ cutting tools specifically designed for plastics, ensuring proper blade speed and feed rate to prevent overheating. |
| Over-tightening fasteners, which can cause stress concentration and cracking in the nylon. | Use washers to distribute load and tighten fasteners to a snug fit, avoiding excessive torque. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pump components and impellers, Wear strips and guides for conveyor systems, Protective guards and panel fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||