This high-performance Nylon stock sheet, engineered for demanding hydraulic systems, offers exceptional wear resistance and low friction. Its robust material properties ensure reliable performance in challenging environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.105" |
| Length | 16" |
| Width | 26" |
Precision-manufactured to tight tolerances, this 0.105-inch thick Nylon stock sheet measures 16 inches in width and 26 inches in length. Crafted from high-grade Nylon, it exhibits excellent tensile strength, abrasion resistance, and chemical inertness, making it ideal for seals, gaskets, wear pads, and hydraulic manifold components. The inherent self-lubricating properties minimize friction and wear in dynamic applications, extending component lifespan and reducing maintenance requirements. Its low moisture absorption ensures dimensional stability under varying environmental conditions, crucial for maintaining seal integrity and system efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the Nylon stock sheet is clean and free from debris. 2. Accurately cut the sheet to the required dimensions using appropriate cutting tools. 3. Install the cut component within the hydraulic system, ensuring proper seating and sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, potentially cracking the Nylon. | Apply even, controlled pressure during installation, following manufacturer guidelines for torque specifications where applicable. |
| Exposing the Nylon to chemicals or temperatures outside its rated specifications. | Verify the chemical compatibility and operating temperature range of Nylon for the specific hydraulic fluid and environment before installation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic seals and O-rings, Wear pads and guide rings, Hydraulic manifold components, Bushings and bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||