This robust Nylon stock sheet provides superior performance in demanding pressure and temperature control environments. Its engineered properties ensure reliability and longevity in critical industrial applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.101" |
| Length | 16" |
| Width | 25" |
Built to exacting engineering tolerances, this 0.101-inch thick Nylon stock sheet measures 16 inches by 25 inches. Nylon's inherent properties of high tensile strength, excellent abrasion resistance, and good chemical stability make it ideal for seals, gaskets, and wear components within pressure and temperature regulation systems. It exhibits a broad operating temperature range and low coefficient of friction, contributing to efficient system operation and extended service life under continuous load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free from debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut component in its intended application, ensuring proper sealing or structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to delamination or uneven edges. | Employ sharp, dedicated cutting tools for plastics, such as a band saw or a precision router, to achieve clean, smooth cuts. |
| Over-tightening fasteners, causing stress concentrations and potential material cracking. | Apply fasteners with appropriate torque, using washers where necessary to distribute load evenly and avoid localized pressure points. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure seals and gaskets, Wear strips and guide components, Temperature-resistant valve seats and liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||