This 0.098-inch thick Nylon stock sheet offers superior durability and wear resistance, ideal for custom hydraulic components. Its robust properties ensure reliable performance in demanding fluid power systems.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.098" |
| Length | 23" |
| Width | 36" |
Manufactured under strict quality controls, this 0.098" thick Nylon stock sheet provides exceptional mechanical strength, excellent abrasion resistance, and good chemical inertness, making it suitable for a wide range of hydraulic applications. The dimensions of 23" x 36" allow for efficient fabrication of seals, gaskets, wear pads, and other critical components. Nylon's low coefficient of friction and inherent lubricity contribute to reduced wear and extended service life in dynamic hydraulic systems, while its dimensional stability ensures consistent performance under varying pressure and temperature conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., saw, router) to precisely cut the component. 3. Smooth all edges and surfaces to ensure a clean fit and prevent premature wear.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive heat during cutting, which can melt or deform the Nylon. | Employ sharp cutting tools and manage cutting speed to minimize heat buildup. Consider using coolant if necessary. |
| Not accounting for thermal expansion and contraction in critical applications. | When designing components, factor in Nylon's thermal expansion coefficient to prevent binding or leakage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seals & Gaskets, Wear Strips & Bushings, Custom Hydraulic Component Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||