This robust 0.095" thick Nylon stock sheet, measuring 42" x 17", offers exceptional durability and chemical resistance. Ideal for custom fabrication in heating and cooling systems.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.095" |
| Length | 42" |
| Width | 17" |
Trusted by engineers across multiple sectors, this Nylon stock sheet provides a reliable solution for demanding environmental controls. Its 0.095" thickness, 42" length, and 17" width offer versatile dimensions for custom-fit components. Nylon's inherent properties, including excellent abrasion resistance, low coefficient of friction, and good chemical inertness, make it suitable for applications such as fan shrouds, duct liners, vibration dampeners, and protective covers within HVAC systems. Its ability to withstand moderate temperatures ensures long-term performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and precisely cut the Nylon stock sheet to the required dimensions for the specific HVAC component. 2. Prepare surfaces for bonding or mechanical fastening, ensuring they are clean and dry. 3. Secure the fabricated Nylon part using appropriate adhesives, rivets, or screws, verifying a tight and sealed fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can melt or deform the Nylon. | Utilize sharp, specialized plastic cutting tools such as a fine-tooth saw or a router with appropriate bits, and manage cutting speed to prevent heat buildup. |
| Over-tightening fasteners, leading to stress cracking or deformation of the Nylon sheet. | Employ washers to distribute load and tighten fasteners only until snug, avoiding excessive torque. Pre-drilling holes slightly larger than the fastener can also help. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC Fan Shrouds and Housings, Duct Liners and Seals, Vibration Dampening Components, Protective Covers for Electrical Components, Custom Gaskets and Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||