This industrial-grade Nylon stock sheet offers exceptional durability and chemical resistance, making it ideal for various pressure and temperature control applications. Precisely manufactured for consistent performance.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.090" |
| Length | 35" |
| Width | 42" |
Engineered for reliability and performance, this 0.090-inch thick Nylon stock sheet measures 35 inches in length and 42 inches in width. Exhibiting excellent tensile strength, abrasion resistance, and a wide operating temperature range, it is well-suited for gasket fabrication, wear strips, and protective components in fluid handling systems, mechanical assemblies, and environments subjected to moderate pressures and thermal cycling. Its inherent lubricity and machinability ensure ease of integration into complex designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using appropriate cutting tools. 2. Fabricate component or gasket based on design specifications. 3. Install component ensuring proper fitment and sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutters not rated for thicker plastics. | Utilize carbide-tipped blades or routers designed for industrial plastics to prevent chipping and ensure clean cuts. |
| Over-tightening fasteners, leading to material deformation. | Employ torque-limiting tools and ensure adequate clearance or washers to distribute load and prevent stress concentration. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Gasket and Seal Fabrication, Wear Strips and Bushings, Protective Covers and Shields.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||