This industrial-grade Nylon stock sheet provides superior strength, wear resistance, and low friction for a wide array of manufacturing and maintenance tasks. Its robust material properties make it ideal for custom fabrication and protective components.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.079" |
| Length | 43" |
| Width | 46" |
Trusted by engineers across multiple sectors, this Nylon stock sheet offers exceptional mechanical performance. Measuring 0.079 inches thick, 43 inches in length, and 46 inches in width, it's manufactured from premium nylon polymer known for its high tensile strength, excellent abrasion resistance, and good chemical inertness. These characteristics make it a preferred material for fabricating bushings, gears, wear pads, and other components subjected to significant mechanical stress and friction in automotive, aerospace, and general industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools such as a band saw or industrial router for precise cuts. 3. Smooth all edges with sandpaper or a deburring tool to remove any sharp points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking tools without proper blade selection. | Employ blades specifically designed for cutting plastics or nylon to prevent melting and ensure clean cuts. |
| Overheating the material during fabrication, leading to deformation. | Use moderate cutting speeds and ensure adequate cooling, if necessary, to avoid thermal degradation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Bushings and Bearings, Wear Strips and Guides, Gears and Sprockets, Protective Covers and Liners, Electrical Insulators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||