This premium Nylon stock sheet provides exceptional performance in pressure and temperature control applications. Its robust material properties ensure reliability and longevity in demanding industrial settings.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.054" |
| Length | 42" |
| Width | 47" |
A proven choice for industrial professionals, this Nylon stock sheet boasts a precise thickness of 0.054 inches, a generous length of 42 inches, and a width of 47 inches. Manufactured from high-grade Nylon, it exhibits superior tensile strength, excellent abrasion resistance, and good chemical inertness, making it ideal for seals, gaskets, and protective barriers in environments with moderate pressure and temperature fluctuations. Its inherent toughness and low coefficient of friction contribute to efficient operation and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free from debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut sheet to the application using approved adhesives or mechanical fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to uneven edges or material damage. | Utilize sharp, industrial-grade cutting tools specifically designed for plastics, such as a band saw or a sharp utility knife for thinner sheets. |
| Inadequate surface preparation before installation. | Thoroughly clean and degrease the mounting surface to ensure optimal adhesion and a secure fit. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Gaskets and Seals for fluid containment systems, Wear strips and guide rails in material handling, Protective barriers and liners in processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||