This robust Nylon stock sheet offers exceptional durability and chemical resistance, ideal for demanding plumbing and janitorial applications. Its versatile size and material properties make it a reliable choice for custom fabrication and protective barriers.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.049" |
| Length | 45" |
| Width | 45" |
A high-performance industrial component, this Nylon stock sheet is engineered from a premium grade of Nylon, renowned for its superior strength-to-weight ratio, excellent abrasion resistance, and resistance to a broad spectrum of chemicals. With a precise thickness of 0.049 inches, and generous dimensions of 45 inches by 45 inches, it provides ample material for diverse manufacturing and repair needs. Its low coefficient of friction and good impact strength further enhance its suitability for applications requiring durability and smooth operation. This material is ideal for fabricating custom gaskets, seals, wear pads, and protective sheeting.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the substrate thoroughly to remove all debris and contaminants. 2. Cut the Nylon stock sheet to the desired dimensions using appropriate cutting tools. 3. Secure the sheet using suitable fasteners or adhesives, ensuring a tight and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to frayed edges. | Employ sharp, industrial-grade cutting tools designed for plastics, such as a band saw or a sharp utility knife, for clean and precise cuts. |
| Inadequate surface preparation before installation. | Ensure the application surface is free from grease, oil, moisture, and dust to guarantee optimal adhesion and long-term performance. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Gasket Fabrication, Protective Liners for Tanks, Wear Strips and Bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||