This premium Nylon stock sheet provides exceptional durability and resistance to heat and pressure. Its robust material properties make it ideal for demanding industrial applications requiring reliable performance.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.044" |
| Length | 39" |
| Width | 26" |
Manufactured under strict quality controls, this Nylon stock sheet offers superior mechanical strength and excellent wear resistance. With a precise thickness of 0.044 inches, a generous length of 39 inches, and a width of 26 inches, it is ideally suited for custom fabrication of seals, gaskets, wear pads, and components within pressure and temperature control systems. The inherent properties of Nylon, including good chemical resistance and low coefficient of friction, ensure longevity and optimal performance in challenging environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the mounting surface thoroughly. 2. Cut the Nylon stock sheet to the precise required dimensions using appropriate tooling. 3. Securely fasten the fabricated component using suitable mechanical fasteners or adhesives, ensuring a tight seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to ragged edges and compromised fit. | Employ sharp, industrial-grade cutting tools specifically designed for plastic or composite materials, such as band saws or laser cutters, for clean, precise cuts. |
| Over-tightening fasteners, which can cause stress cracking or deformation of the Nylon. | Apply fasteners with moderate torque, utilizing washers if necessary, to distribute pressure evenly and prevent localized stress concentrations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: High-pressure hydraulic system seals and gaskets, Wear-resistant components in pumps and valves, Thermal insulation barriers in heated enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||