This high-performance nylon stock sheet is engineered for demanding hydraulic applications. Its exceptional wear resistance and low coefficient of friction ensure reliable component longevity and operational efficiency.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.044" |
| Length | 25" |
| Width | 39" |
A high-performance industrial component, this 0.044" thick nylon stock sheet offers superior abrasion resistance, excellent impact strength, and a low coefficient of friction crucial for hydraulic system longevity. Manufactured from robust nylon, it measures 25" in width and 39" in length, providing a versatile material for custom fabrication of seals, gaskets, wear pads, and structural components within hydraulic machinery, pumps, and cylinders. Its inherent chemical resistance further enhances its suitability for diverse operational environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to the required dimensions using appropriate tooling for nylon. 2. Fabricate components according to design specifications, ensuring precise tolerances. 3. Install fabricated parts into hydraulic systems, verifying proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to delamination or chipping. | Employ sharp, specialized cutting tools designed for plastics and composites to ensure clean cuts. |
| Over-tightening fasteners, causing stress concentration and potential cracking. | Apply fasteners with appropriate torque specifications and consider using washers to distribute load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals, Wear pads and guides, Gaskets and diaphragms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||