This 0.038-inch thick nylon stock sheet, measuring 46 by 19 inches, is engineered for rigorous hydraulic system environments. Its robust material composition ensures longevity and reliability in demanding industrial settings.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.038" |
| Length | 46" |
| Width | 19" |
A high-performance industrial component, this nylon stock sheet is precisely manufactured to a thickness of 0.038 inches, with dimensions of 46 inches in length and 19 inches in width. Exhibiting excellent tensile strength, abrasion resistance, and a low coefficient of friction, this nylon is ideal for seals, gaskets, bearings, and wear pads within hydraulic systems. Its inherent chemical resistance to many hydraulic fluids further enhances its suitability for critical fluid power applications, ensuring operational integrity and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean, dry, and free from debris. 2. Cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut nylon component into its designated position within the hydraulic assembly, ensuring a proper seal if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools leading to jagged edges or delamination. | Utilize sharp, carbide-tipped blades designed for plastics or nylon to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause the nylon to deform or crack. | Apply fasteners snugly, but avoid excessive torque. Consider using washers to distribute load if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals, Wear strips and guides, Bearing cages, Pump components, Valve seats.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||