This 0.032" thick Nylon stock sheet offers exceptional durability and wear resistance. Its precise dimensions make it ideal for custom fabrication and a wide range of industrial hardware solutions.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.032" |
| Length | 36" |
| Width | 14" |
Built to exacting engineering tolerances, this 0.032" thick Nylon stock sheet measures 14" wide by 36" in length. Fabricated from high-grade Nylon, it exhibits superior tensile strength, excellent chemical resistance, and low friction coefficient, ensuring robust performance in demanding environments. This material is ideal for producing custom wear pads, bushings, gears, and protective components where dimensional stability and abrasion resistance are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using appropriate cutting tools for Nylon. 2. Prepare mating surfaces for secure attachment. 3. Fasten or adhere the fabricated Nylon component using suitable industrial adhesives or mechanical fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize sharp, specialized cutting blades for plastics, ensuring proper feed rates and cooling to prevent material damage. |
| Over-tightening fasteners, which can cause stress concentrations and cracking in the Nylon. | Employ torque-limiting tools and washers to distribute load evenly and prevent over-compression of the Nylon material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Bushings and Bearings, Wear Strips and Guides, Protective Covers and Guards, Gears and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||