This high-grade Nylon Stock Sheet is engineered for critical hydraulic systems. Its robust material properties offer superior wear resistance and excellent sealing capabilities, ensuring operational longevity and performance.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.025" |
| Length | 42" |
| Width | 27" |
Precision-manufactured to tight tolerances, this 0.025-inch thick Nylon stock sheet measures 42 inches in length and 27 inches in width. Composed of premium industrial-grade nylon, it exhibits exceptional tensile strength, high abrasion resistance, and low coefficient of friction, making it ideal for seals, gaskets, and wear components within hydraulic fluid systems. Its inherent chemical resistance to common hydraulic oils and solvents further enhances its suitability for demanding operational environments where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using appropriate tooling. 2. Deburr all edges to prevent particulate contamination. 3. Install component as per system design specifications, ensuring proper seating and sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull cutting tool, leading to jagged edges and potential material stress. | Employ sharp, dedicated cutting tools designed for polymer materials to ensure clean cuts and avoid initiating cracks. |
| Insufficient deburring, leaving sharp edges that can shed material into the hydraulic system. | Thoroughly deburr all cut edges with a fine-grit file or deburring tool to create a smooth, contaminant-free surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals, Wear pads and bushings, Gaskets and diaphragms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||