This high-performance nylon stock sheet provides exceptional durability and chemical resistance. Ideal for fabricating custom seals, gaskets, and protective components in demanding plumbing and janitorial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.014" |
| Length | 39" |
| Width | 31" |
Precision-manufactured to tight tolerances, this 0.014-inch thick nylon stock sheet offers superior tensile strength and excellent abrasion resistance. Its inherent chemical inertness makes it suitable for contact with a wide range of fluids and cleaning agents commonly found in plumbing and janitorial settings. The 39-inch by 31-inch dimensions provide ample material for creating custom-fit solutions. Nylon's low coefficient of friction also contributes to its effectiveness in applications requiring smooth movement and reduced wear.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the nylon stock sheet to the required dimensions using a sharp cutting tool. 2. Prepare the mating surfaces for proper adhesion or mechanical fastening. 3. Install the fabricated component securely, ensuring a tight fit and proper sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull blade for cutting, leading to rough edges and inaccurate dimensions. | Utilize a sharp, industrial-grade cutting tool for clean and precise cuts. |
| Over-tightening fasteners, which can stress and crack the nylon material. | Apply appropriate torque and use washers to distribute pressure evenly when fastening. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom gasket fabrication, Seal creation for pipe fittings, Protective liners for tanks and containers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||