This high-performance Nylon stock sheet offers exceptional durability and resilience. Precisely manufactured to 0.013" thickness, it is engineered for demanding industrial environments requiring reliable pressure and temperature control.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.013" |
| Length | 23" |
| Width | 16" |
A proven choice for industrial professionals, this Nylon stock sheet boasts a precise thickness of 0.013 inches, a generous length of 23 inches, and a width of 16 inches. Its inherent material properties, including excellent tensile strength, abrasion resistance, and a broad operating temperature range, make it suitable for critical applications. This material effectively withstands moderate pressures and fluctuating temperatures, ensuring consistent performance in seals, gaskets, and protective barriers within various industrial systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any debris or contaminants. 2. Cut the Nylon stock sheet to the required dimensions using a sharp industrial cutting tool. 3. Carefully position and secure the cut Nylon piece into the intended application area, ensuring a snug and effective seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull cutting tool, resulting in rough edges and compromised sealing. | Always use a sharp, industrial-grade cutting blade for clean, precise cuts that ensure optimal sealing performance. |
| Improper surface preparation, leading to leaks or premature material degradation. | Ensure both the Nylon sheet and the mating surface are impeccably clean and dry before installation to guarantee a reliable seal. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Gasketing for fluid and pneumatic systems, Seals in moderate pressure and temperature environments, Protective barriers and wear pads.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||