This robust nylon stock sheet, engineered for demanding industrial environments, provides exceptional strength and durability for pulling, lifting, and material handling applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.599" |
| Length | 23" |
| Width | 32" |
Specified by design engineers worldwide, this 0.599-inch thick nylon stock sheet offers superior load-bearing capacity and resistance to abrasion. Its inherent low coefficient of friction facilitates smooth movement in sliding and guiding applications. The material's high tensile strength and impact resistance ensure longevity under rigorous operating conditions. Dimensions are precisely 23 inches in length and 32 inches in width, meeting stringent manufacturing tolerances for seamless integration into complex systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove all debris and contaminants. 2. Position the nylon stock sheet according to the design specifications, ensuring proper alignment. 3. Secure the sheet using appropriate fasteners, ensuring even distribution of load to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during fastening, leading to material deformation or cracking. | Employ controlled tightening of fasteners, utilizing torque wrenches when applicable, to avoid over-stressing the nylon. |
| Improper surface preparation, resulting in poor adhesion or premature wear. | Ensure the mounting surface is smooth, dry, and free from any oils, greases, or loose particles before installation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guide rails in material handling systems, Protective liners for chutes and hoppers, Components in heavy-duty lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||