This robust Nylon stock sheet is engineered for demanding Heating & Cooling applications. Its exceptional durability, chemical resistance, and high impact strength make it ideal for harsh environments and continuous operation.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.656" |
| Length | 37" |
| Width | 46" |
Purpose-built for heavy-duty applications, this Nylon stock sheet offers superior performance in demanding industrial settings. Measuring 0.656 inches thick, 37 inches in length, and 46 inches in width, it provides ample material for fabrication. Nylon's inherent properties, including excellent abrasion resistance, good tensile strength, and resistance to various chemicals and oils, ensure longevity and reliability in heating and cooling systems, such as ductwork components, fan blades, and protective shielding.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated Nylon components using suitable fasteners or bonding agents recommended for Nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to rough edges or material cracking. | Employ sharp, specialized plastic cutting blades (e.g., carbide-tipped) and maintain a consistent, controlled feed rate during cutting. |
| Over-tightening fasteners, which can cause stress concentration and eventual cracking of the Nylon. | Utilize washers and torque fasteners to manufacturer specifications, or use self-tapping screws designed for plastic applications. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC duct liners and insulation components, Fan shrouds and housings in cooling systems, Protective barriers and wear pads in industrial heating equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||