Engineered for extreme environments, this robust 0.460" thick nylon stock sheet offers exceptional tensile strength and wear resistance, ideal for critical pulling and lifting operations.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.460" |
| Length | 20" |
| Width | 35" |
Purpose-built for heavy-duty applications, this nylon stock sheet, measuring 0.460" in thickness, 20" in length, and 35" in width, leverages the inherent properties of nylon for superior performance. Its high tensile strength and excellent abrasion resistance make it a reliable choice for demanding industrial tasks. The material's low coefficient of friction facilitates smooth operation in sliding and pulling applications, while its inherent toughness resists impact and deformation under significant loads. Suitable for continuous use in challenging conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to ensure optimal adhesion and stability. 2. Position the nylon stock sheet precisely according to the design specifications. 3. Secure the sheet using appropriate fasteners or bonding agents, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that cannot bear the required load. | Select fasteners rated for the maximum anticipated load, considering safety factors. |
| Improper surface preparation leading to slippage or premature failure. | Ensure the mounting surface is free of debris, oil, and moisture before installation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Winch and hoist line spooling protection, Sliding wear pads in heavy machinery, Protective liners for cargo and towing systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||