Engineered from robust carbon steel, this stock sheet is designed for extreme pulling and lifting operations. Its substantial thickness and dimensions provide unparalleled strength and reliability in critical industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.724" |
| Length | 35" |
| Width | 25" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a thickness of 0.724 inches, a length of 35 inches, and a width of 25 inches. Composed of high-tensile carbon steel, it offers exceptional yield and tensile strength, ensuring superior resistance to deformation and fracture under heavy loads. Its dense, homogenous microstructure guarantees consistent performance and longevity in demanding industrial applications where safety and structural integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any damage or defects prior to installation. 2. Ensure mounting surface is clean, dry, and free from debris. 3. Securely fasten the stock sheet using appropriate industrial-grade fasteners and load-rated hardware, following recommended torque specifications for the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always utilize fasteners and hardware rated for the anticipated load and environmental conditions, ensuring they are compatible with the carbon steel material. |
| Mounting on an uneven or unstable surface. | Verify that the mounting surface is perfectly level and structurally sound to prevent uneven stress distribution and potential failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty winch and hoist anchor points, Industrial material handling and lifting frames, Structural reinforcement in extreme load environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||