This high-strength carbon steel stock sheet is engineered for critical pulling and lifting applications. Its substantial dimensions and robust material composition ensure unwavering performance under extreme loads and harsh conditions.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.672" |
| Length | 31" |
| Width | 23" |
Designed for demanding industrial environments, this carbon steel stock sheet offers exceptional tensile strength and load-bearing capacity. Measuring 0.672 inches in thickness, 31 inches in length, and 23 inches in width, it is fabricated from premium carbon steel, chosen for its inherent durability and resistance to deformation under stress. This material is ideal for fabricating custom rigging components, structural reinforcement in heavy machinery, and as a foundational element in robust pulling and lifting apparatuses where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any pre-existing damage or defects prior to use. 2. Ensure proper handling equipment is utilized for positioning and integration. 3. Securely fasten or integrate sheet into the intended structural or mechanical assembly according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using for applications exceeding material's rated load capacity. | Always consult engineering drawings and perform load calculations to ensure the sheet's capabilities are not exceeded. |
| Exposing to corrosive environments without protective coatings. | Apply appropriate anti-corrosion treatments or coatings if the sheet will be exposed to moisture or chemical agents. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Fabrication of custom lifting slings and hardware, Structural support in heavy-duty machinery, Reinforcement plates for industrial cranes and hoists.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||