This heavy-gauge carbon steel stock sheet is engineered for demanding pulling and lifting operations. Its substantial thickness and robust material properties make it ideal for structural support and high-stress applications where unwavering performance is paramount.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.626" |
| Length | 26" |
| Width | 38" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a robust 0.626-inch thickness, providing exceptional structural integrity for heavy-duty applications. Measuring 26 inches in length and 38 inches in width, its dimensions are optimized for integration into various pulling and lifting systems. Manufactured from high-grade carbon steel, it offers superior tensile strength and abrasion resistance, ensuring longevity under extreme loads and harsh operating conditions. This material composition is critical for applications requiring consistent performance and resistance to deformation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any damage or imperfections prior to installation. 2. Ensure mounting surface is clean, dry, and structurally sound. 3. Securely fasten the sheet using appropriate grade bolts and washers, ensuring even torque distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that do not match the sheet's load capacity. | Always use fasteners with a tensile strength rating equivalent to or exceeding the expected load on the sheet. |
| Mounting the sheet on a structurally weak or damaged surface. | Verify the integrity of the mounting surface and reinforce it if necessary to support the sheet's intended use. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Winch mounting plates, Crane hook attachment points, Heavy equipment towing assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||