This robust brass stock sheet is engineered for demanding pulling and lifting operations. Its substantial dimensions and high-quality brass construction ensure exceptional durability and reliability under extreme stress.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.781" |
| Length | 42" |
| Width | 33" |
Purpose-built for heavy-duty applications, this brass stock sheet offers a substantial 0.781-inch thickness, 42-inch length, and 33-inch width, providing a large surface area for robust structural integration. Composed of high-grade brass, it exhibits excellent tensile strength, inherent corrosion resistance against various chemicals and saltwater environments, and non-sparking properties crucial for hazardous locations. Its density and rigidity make it ideal for reinforcing load-bearing components in pulling and lifting machinery, such as winch bases, pulley system anchor points, and custom rigging plates where unwavering structural integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately position the brass stock sheet according to design specifications. 3. Securely fasten the sheet using appropriate high-strength fasteners and load-rated hardware, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-torquing fasteners during installation. | Use a torque wrench calibrated to manufacturer specifications to prevent material deformation or damage to mounting points. |
| Using incompatible fasteners that can lead to galvanic corrosion. | Employ fasteners made of materials with similar or superior corrosion resistance, such as stainless steel or brass, as recommended for the specific environment. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom winch and hoist fabrication, Heavy-duty rigging and anchor points, Reinforcement plates for industrial lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||