Engineered for extreme environments, this substantial brass stock sheet provides unparalleled strength and corrosion resistance for critical pulling and lifting operations. Its dense composition ensures longevity under severe stress.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.890" |
| Length | 46" |
| Width | 13" |
Purpose-built for heavy-duty applications, this brass stock sheet offers exceptional tensile strength and resistance to environmental degradation, making it ideal for demanding industrial settings. Measuring 0.890 inches in thickness, 46 inches in length, and 13 inches in width, its solid brass construction (specific alloy designation if available, e.g., UNS C26000) provides superior load-bearing capacity and longevity. Its non-sparking properties are also crucial in hazardous atmospheres, and its inherent corrosion resistance ensures performance in marine, chemical processing, and extreme temperature environments where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surface is clean, level, and structurally sound. 2. Carefully position the brass stock sheet to align with pre-drilled holes or attachment points. 3. Securely fasten the sheet using appropriate high-strength, corrosion-resistant hardware (e.g., stainless steel bolts and nuts) ensuring even torque distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inappropriate fasteners that can lead to premature failure. | Always use fasteners rated for the intended load and material compatibility to prevent corrosion and ensure secure attachment. |
| Mounting on an uneven or unstable surface, compromising structural integrity. | Verify the mounting surface is flat, rigid, and capable of supporting the full operational load of the brass sheet and any attached equipment. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty winch plates, Marine deck reinforcement, Custom lifting equipment components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||