This robust brass stock sheet is engineered for demanding pulling and lifting tasks. Its substantial thickness and material composition offer exceptional strength and longevity in harsh industrial settings.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.772" |
| Length | 13" |
| Width | 23" |
Purpose-built for heavy-duty applications, this brass stock sheet measures 0.772 inches in thickness, 13 inches in width, and 23 inches in length. Constructed from high-grade brass, it exhibits excellent tensile strength and resistance to corrosion, making it ideal for environments where exposure to moisture or chemicals is a concern. The alloy's inherent non-sparking properties also make it suitable for hazardous locations. This stock sheet is designed to withstand significant mechanical stress, ensuring reliable performance in critical pulling and lifting operations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Position the brass stock sheet according to the project design specifications. 3. Securely fasten the sheet using appropriate industrial-grade hardware, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-strength fasteners for mounting. | Employ high-tensile strength bolts or rivets specifically rated for the intended load capacity of the pulling/lifting application. |
| Exposing the brass sheet to aggressive acids or abrasive cleaning agents. | Utilize mild, non-corrosive cleaning solutions and avoid abrasive materials that could scratch or degrade the brass surface. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Reinforcement plates for heavy-duty pulley systems, Structural components in custom lifting jigs and fixtures, Wear plates for sliding mechanisms in industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||