This robust carbon steel stock sheet is engineered for demanding pulling and lifting operations. Its substantial thickness and precise dimensions ensure exceptional load-bearing capacity and long-term performance in industrial environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.849" |
| Length | 13" |
| Width | 40" |
A high-performance industrial component, this carbon steel stock sheet boasts a significant thickness of 0.849 inches, a length of 13 inches, and a width of 40 inches. Fabricated from high-grade carbon steel, it exhibits excellent tensile strength and yield strength, making it ideal for applications requiring substantial structural integrity under high stress. The material's inherent toughness and resistance to deformation are critical for safe and efficient operation in pulling, lifting, and general fabrication tasks where durability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the stock sheet for any defects or damage prior to use. 2. Ensure the intended mounting surface or connection points are clean and prepared. 3. Securely fasten the stock sheet using appropriate industrial-grade hardware and welding techniques as per design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inappropriate fasteners for securing the sheet. | Always utilize fasteners (bolts, nuts, rivets) rated for the expected load and compatible with carbon steel, ensuring proper torque application. |
| Subjecting the sheet to loads exceeding its calculated working load limit. | Perform thorough load calculations based on the sheet's dimensions, material properties, and application requirements. Adhere strictly to established safety factors. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty winch anchor plates, Crane boom reinforcements, Industrial rigging components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||