This 0.061" thick carbon steel stock sheet provides a robust and cost-effective solution for fabricating hydraulic components. Its precise dimensions ensure consistent performance and ease of integration into various systems.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.061" |
| Length | 37" |
| Width | 32" |
Specified by design engineers worldwide, this 0.061" thick carbon steel stock sheet (37" length, 32" width) offers exceptional strength and formability, crucial for demanding hydraulic applications. The material's inherent tensile strength and yield point are well-suited for components subjected to high pressures and dynamic loads, ensuring structural integrity and longevity. Its machinability and weldability facilitate intricate designs and efficient manufacturing processes, meeting stringent industry standards for hydraulic fluid containment and power transmission.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using appropriate metal cutting tools. 2. Form to specified contours for hydraulic manifold or component fabrication. 3. Weld or fasten components using approved industrial methods, ensuring leak-proof seals.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel susceptible to corrosion in hydraulic fluid environments. | Always specify and use carbon steel with appropriate surface treatments or coatings if exposure to corrosive elements is anticipated. |
| Inadequate edge preparation prior to welding, leading to weak or porous welds. | Ensure all edges are clean, de-burred, and properly beveled according to welding specifications before joining. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifolds, Cylinder Components, Reservoir Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||