This high-strength carbon steel stock sheet is designed for demanding pulling and lifting applications. Its substantial 0.429-inch thickness and generous dimensions provide exceptional load-bearing capacity and structural integrity.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.429" |
| Length | 43" |
| Width | 46" |
Trusted by engineers across multiple sectors, this carbon steel stock sheet offers robust performance for critical pulling and lifting tasks. Manufactured from high-grade carbon steel, it boasts a tensile strength of approximately 60,000 PSI and a yield strength of around 35,000 PSI, ensuring reliable structural integrity under significant stress. With precise dimensions of 0.429 inches (10.9 mm) thickness, 43 inches (1092 mm) length, and 46 inches (1168 mm) width, this sheet is ideal for custom fabrication of heavy-duty winches, hoists, and structural supports where unwavering durability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Accurately position the stock sheet according to the engineering design or structural requirements. 3. Secure the stock sheet using appropriate heavy-duty fasteners (e.g., high-strength bolts and washers) rated for the intended load capacity. Ensure even torque distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always use fasteners specifically rated for the maximum anticipated load of the pulling or lifting application, ensuring they meet or exceed the strength of the carbon steel sheet. |
| Inadequate surface preparation before mounting. | Thoroughly clean and deburr the mounting surface and the stock sheet to ensure full contact and prevent stress concentrations, which can lead to premature failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom winch fabrication, Heavy-duty hoist frame construction, Structural supports for lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||