This robust carbon steel stock sheet provides exceptional structural integrity for demanding plumbing and janitorial projects. Its substantial dimensions and material composition ensure reliability and extended service life.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.842" |
| Length | 37" |
| Width | 33" |
A high-performance industrial component, this carbon steel stock sheet offers superior tensile strength and durability, essential for heavy-duty applications. With a precise thickness of 0.842 inches, a generous length of 37 inches, and a width of 33 inches, it provides a substantial surface area for fabrication. The inherent properties of carbon steel, including its resistance to wear and impact, make it an optimal choice for applications where structural load-bearing capacity and longevity are paramount. Its compatibility with various welding and fabrication techniques further enhances its utility in industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark the required dimensions on the carbon steel stock sheet. 2. Utilize appropriate cutting tools (e.g., plasma cutter, abrasive saw) to achieve precise cuts. 3. Prepare edges for welding or joining according to project specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrectly measuring or marking cut lines, leading to material waste or ill-fitting components. | Double-check all measurements using a calibrated measuring device and use a sharp marker for clear, precise lines. |
| Using inappropriate cutting tools, resulting in rough edges, heat damage, or compromised material integrity. | Select cutting tools specifically designed for carbon steel of this thickness and ensure they are properly maintained. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom fabrication for industrial piping supports, Reinforcement plates for heavy-duty janitorial equipment, Custom structural components in washdown areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||