This robust carbon steel stock sheet is engineered for demanding pulling and lifting operations. Its precise dimensions and durable material make it an ideal component for constructing custom rigging, winch drums, and reinforcing structural elements in material handling systems.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.031" |
| Length | 45" |
| Width | 46" |
Precision-manufactured to tight tolerances, this carbon steel stock sheet offers exceptional strength and durability for critical pulling and lifting applications. Measuring 0.031 inches in thickness, 45 inches in length, and 46 inches in width, it provides a substantial surface area for fabricating robust components. The inherent tensile strength and yield strength of carbon steel ensure reliable performance under significant load stresses. Its formability allows for custom shaping and welding, making it suitable for a wide range of industrial rigging, winch systems, and material handling equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility for intended application. 2. Clean surfaces thoroughly to ensure proper adhesion or weld integrity. 3. Cut, shape, and install according to engineered design specifications and safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect thickness for the load capacity. | Always calculate required material thickness based on maximum expected load and safety factors. |
| Inadequate surface preparation before welding or fastening. | Ensure all surfaces are free of rust, oil, and debris to achieve strong, reliable connections. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom winch drum fabrication, Reinforcement plates for lifting equipment, Components for manual and powered pulling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||