This robust carbon steel stock sheet is engineered for demanding pressure and temperature control systems. Its precise dimensions and material composition ensure reliable performance in critical industrial environments.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.396" |
| Length | 19" |
| Width | 20" |
Built to exacting engineering tolerances, this 0.396-inch thick carbon steel stock sheet measures 19 inches in length and 20 inches in width. Fabricated from high-grade carbon steel, it exhibits excellent tensile strength and thermal conductivity, making it ideal for applications requiring robust structural integrity under extreme pressure and temperature fluctuations. Its smooth, consistent surface finish facilitates superior sealing and minimizes the risk of leaks in critical fluid and gas handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface area is clean, dry, and free of contaminants. 2. Position the stock sheet accurately according to design specifications. 3. Secure the sheet using appropriate fastening methods as dictated by the system's pressure and temperature requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor sealing. | Thoroughly clean and degrease all mating surfaces before installation. |
| Using incorrect fasteners for the operating pressure and temperature. | Consult system design documentation to select fasteners with adequate tensile strength and temperature rating. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: High-pressure vessel fabrication, Temperature control manifold construction, Industrial heat exchanger components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||