This robust 0.731" thick carbon steel stock sheet is engineered for demanding plumbing and janitorial environments. Its substantial gauge provides exceptional structural integrity and durability for custom fabrication and repair projects.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.731" |
| Length | 21" |
| Width | 21" |
Manufactured under strict quality controls, this 0.731" thick carbon steel stock sheet offers superior strength and rigidity, essential for heavy-duty applications. Measuring 21" by 21", its dense composition (typical ASTM A36 or equivalent) ensures excellent load-bearing capacity and resistance to deformation under pressure. The inherent properties of carbon steel make it highly weldable and machinable, facilitating seamless integration into existing systems or custom builds for plumbing infrastructure and janitorial equipment fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark precise cut lines on the carbon steel sheet based on project requirements. 2. Utilize appropriate cutting tools (e.g., abrasive cut-off wheel, plasma cutter) to section the sheet to the desired dimensions. 3. Prepare edges for joining (welding, bolting) by deburring and cleaning thoroughly. If welding, ensure proper pre-heating and post-heating procedures are followed for carbon steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to material damage or safety hazards. | Employ tools specifically designed for cutting thick carbon steel, such as abrasive saws, plasma cutters, or heavy-duty shears, while wearing appropriate personal protective equipment (PPE). |
| Inadequate edge preparation before joining, resulting in weak or compromised welds/connections. | Thoroughly clean and deburr all cut edges to remove mill scale, rust, and any debris. For welding, ensure a proper bevel is created if required by the joint design. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom fabrication of heavy-duty plumbing support structures, Reinforcement plates for industrial janitorial equipment, Fabrication of custom brackets and mounting hardware in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||