This robust carbon steel stock sheet, measuring 0.596" thick by 30" wide and 40" long, is specifically designed for high-stress pulling and lifting operations, offering exceptional strength and reliability.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.596" |
| Length | 30" |
| Width | 40" |
Built to exacting engineering tolerances, this carbon steel stock sheet offers a nominal thickness of 0.596 inches, with precise dimensions of 30 inches in width and 40 inches in length. Fabricated from high-grade carbon steel, it possesses a high tensile strength and yield strength, making it ideally suited for applications demanding extreme load-bearing capacity. Its robust construction ensures resistance to deformation and fracture under significant dynamic and static forces encountered in industrial pulling and lifting equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any damage or defects prior to installation. 2. Ensure mounting surfaces are clean, level, and capable of supporting the intended load. 3. Securely fasten the sheet using appropriate grade hardware and recommended torque specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners for securing the sheet. | Always utilize fasteners that are rated for the expected load and are made from high-strength materials, ensuring proper thread engagement and torque. |
| Mounting the sheet on a substrate that cannot withstand the applied forces. | Verify that the supporting structure has sufficient structural integrity and is designed to handle the maximum anticipated loads, including shock loads. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Winch mounting plates, Crane boom reinforcements, Heavy-duty towing attachments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||