Engineered from high-grade carbon steel, this stock sheet offers exceptional tensile strength and durability for demanding pulling and lifting operations. Its substantial thickness ensures structural integrity under heavy loads.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.588" |
| Length | 16" |
| Width | 17" |
Precision-manufactured to tight tolerances, this 0.588-inch thick carbon steel stock sheet measures 16 inches in length and 17 inches in width. The material's high yield and tensile strength, inherent to its carbon steel composition, make it suitable for applications requiring significant load-bearing capacity and resistance to deformation. Its robust construction ensures reliable performance in environments subject to extreme stress and impact, commonly found in industrial rigging, construction, and heavy machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify the sheet is free from defects and damage. 2. Ensure mounting surfaces are clean and prepared for secure attachment. 3. Install the sheet using appropriately rated fasteners and mounting hardware, adhering to all load-bearing specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or inappropriate fasteners for load requirements. | Always consult load charts and use fasteners (bolts, rivets, welds) that meet or exceed the calculated working load limit for the intended application. |
| Failing to account for potential stress concentrations around mounting points. | Distribute loads evenly and consider reinforcing areas where stress may be concentrated, such as near holes or edges, to prevent premature failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Reinforcing structural components in lifting equipment, Custom fabrication for heavy-duty rigging systems, Base plates and mounting hardware for industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||