This premium carbon steel stock sheet is engineered for demanding pulling and lifting operations. Its substantial 0.345-inch thickness and robust dimensions ensure exceptional strength and reliability under heavy loads.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.345" |
| Length | 46" |
| Width | 19" |
A high-performance industrial component, this carbon steel stock sheet is fabricated from high-grade carbon steel, offering superior tensile strength and yield strength crucial for high-stress pulling and lifting tasks. With precise dimensions of 0.345 inches in thickness, 46 inches in length, and 19 inches in width, it provides a substantial surface area and structural integrity. This material is selected for its resilience, resistance to deformation, and ability to withstand significant impact and abrasive forces, making it ideal for the rigors of industrial environments and demanding mechanical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Position the stock sheet securely, aligning mounting holes if applicable. 3. Fasten the stock sheet using appropriate industrial-grade hardware (e.g., heavy-duty bolts, rivets) with sufficient torque for the application's load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade fasteners. | Always use industrial-grade fasteners rated for the specific load capacity and environmental conditions. |
| Improper surface preparation leading to poor adhesion or stress points. | Thoroughly clean and prepare the mounting surface to ensure optimal contact and load distribution. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Reinforcement plates for lifting equipment, Structural components in winches and hoists, Wear plates for heavy-duty material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||